7800 Series from CinchSeal®
The newly designed 7800 Series CinchSeal® for screw conveyors, shaft handling equipment, and other bulk handling equipment are made out of 316 Stainless Steel to handle dry and slurry products in the food service, pharmaceutical and chemical industries where stainless steel is a requirement.
Standard Features
- Zero Maintenance due to unique self adjusting design
- Manufactured out of 316 Stainless Steel to handle caustic wash downs
- Consumes 30% less power than rope packing
- Will not damage or undercut shafts tops product loss and premature bearing failure
- Seals dust and Vapors
- Designed for C.E.M.A. screw conveyor and bulk handling equipment, the 7800 series is a self-adjusting seal.
- Temperature ranges –50˚F/45.55˚C to 400˚F/204˚C
- Bolting pattern will accomodate flange mounted bearings
- Designed with linear shaft seal qualities, it can handle linear shaft growth and axial runout
- Purge with air, 5 to 8 psig above vessel pressure, or silicone grease
Available Accessories
Self Adjustment and Aligning
The CinchSeal module readily accommodates a reasonable amount of shaft vibration, misalignment or wobble. The rotor cup “floats” against the face of the stator plate so any lateral shaft movement produces nothing more than a slight orbital eccentricity.
Contact us today for more information on the 7800 Series bulk seals, different food handling seals, or any of our other products.
7800 Series – Rotary Shaft Seal Dimensional Information
| A | B | C | D (min.) | D (max.) |
|---|---|---|---|---|
| 1,5 | 0,625 | 5,375 | 3,3 | 4,357 |
| 2,0 | 0,75 | 6,50 | 4,0 | 5,390 |
| 2,437 | 0,75 | 7,375 | 4,50 | 6,275 |
| 3,0 | 0,88 | 7,875 | 5,50 | 6,670 |
| 3,437 | 0,88 | 9,25 | 6,76 | 8,0 |